Items where Subject is "H000 Engineering > H300 Mechanical Engineering"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Jump to: B | C | D | G | H | K | L | M | N | P | S | T | V | W | X
Number of items at this level: 61.

B

Baha, B. and Ahmadi, O. (2010) The rapid development of Computer Science and Information and Communication Technology (ICT)courses at higher education institutions in Afghanistan In: 2010 ASEE Annual Conference, 20-23 June, 2010, Louisville, Kentucky, USA.

Bates, Michael C. (2004) Parametric Design of Diesel Engine Inlet Ports Doctoral thesis, University of Brighton.

Begg, Steven, De Sercey, Guillaume, Heikal, Morgan, Gilchrist, R., Noda, Y. and Mamiya, Y. (2009) Experimental investigation of the characteristics of oil behaviour in an idealised engine crankcase In: Proc. JUMV Intl. Automotive Conf. and Exhibition (XXII Science and Motor Vehicles 2009).

Begg, Steven, Hindle, M., Mason, D. and Heikal, Morgan (2008) Dispersed flow of fuel droplets on the intake valve region of a port-injected engine In: 22nd European Conference on Liquid Atomization and Spray Systems, Como Lake, Italy, 8-10 September 2008.

Begg, Steven, Mason, David and Heikal, Morgan (2009) Combustion phasing in an optical gasoline engine operating in the limit of spark-assisted controlled auto-ignition Proc. JUMV Intl. Automotive Conf. and Exhibition (XXII Science and Motor Vehicles 2009), Paper 36.

Bykov, V., Goldfarb, I., Gol'dshtein, V., Sazhin, Sergei and Sazhina, Elena (2007) System decomposition technique for spray modelling in CFD codes Computers and Fluids, 36 (3). pp. 601-610. ISSN 0045-7930

C

Cameretti, M.C., Piazzesi, R., Reale, F. and Tuccillo, R. (2008) Combustion simulation of an EGR operated micro-gas turbine In: American Society of Mechanical Engineers paper GT2008-50692. ASMI.

Covill, Derek (2007) Structural behaviour of pipeline upsetter design: a finite element study South East Knowledge Exchange, Brighton, UK. (Unpublished)

Covill, Derek, Blayden, Alex, Coren, Daniel and Begg, Steven (2015) Parametric finite element analysis of steel bicycle frames: the influence of tube selection on frame stiffness In: The Impact of Technology on Sport VI' 7th Asia-Pacific Congress on Sports Technology, APCST2015, Barcelona, Spain.

Cox, Steven G. (1996) Engineering Design Optimisation with Physical Modelling and Evolutionary Algorithms Doctoral thesis, University of Brighton.

D

De Sercey, Guillaume, Awcock, G. and Heikal, Morgan (2005) Use of LIF image acquisition and analysis in developing a calibrated technique for in-cylinder investigation of the spatial distribution of air-to-fuel mixing in direct injection gasoline engines Computers in Industry, 56 (8-9). pp. 1005-1015. ISSN 0166-3615

De Sercey, Guillaume, Gardhouse, Timothy, Crua, Cyril, Edwards, Simon, Thompson, Celine and de la Garza, Oscar (2014) Optical investigation of cylinder oil sprays in slow-speed marine diesel engines In: Lubrication, Maintenance and Tribotechnology LUBMAT 2014, Manchester, UK, 25-27 June 2014.

De Zoysa, M.M., Howlett, R.J. and Walters, Simon (2000) Effects of varying engine block temperature on spark voltage characteristics for the measurement of AFR in IC engines In: International Conference on Knowledge-based Information Engineering Systems and Applied Technologies, 30 Aug - 01 Sep 2000, Brighton, UK.

De Zoysa, M.M., Howlett, R.J. and Walters, Simon (2000) Measurement of air-fuel ratio in internal combustion engines using neural networks In: International Conference on the Engineering of Intelligent Systems, 27-30 June 2000, Paisley, Scotland.

DeLaurey, Lyndon (2015) Soot formation at atmospheric and diesel engine conditions using 2D time-resolved laser induced incandescence. Doctoral thesis, University of Brighton.

Dombrovsky, L.A., Sazhin, Sergei and Zinoviev, A. (2004) Thermal explosion in flammable gas containing fuel droplets: asymptotic analysis In: 5th Minsk International Heat and Mass Transfer Forum, May 24-28, Minsk, Belarus. Section 4: Heat and mass transfer in chemically reacting systems. National Academy of Sciences of Belarus, Minsk, pp. 346-347.

G

Georgoulas, Anastasios and Marengo, Marco Numerical simulation of flow boiling in microchannels: bubble growth, detachment and coalescence In: UK Heat Transfer Conference 2015, Edinburgh, 7-8 September 2015.

Georgoulas, Anastasios and Marengo, Marco (2015) Numerical simulation of pool boiling: the effects of initial thermal boundary layer, contact angle and wall superheat In: Proceedings of 14th UK Heat Transfer Conference, Edinburgh, UK, 7-8 Sep 2015.

H

Howlett, R.J., Dawe, G. and Walters, Simon (2007) Intelligent condition monitoring of high-power laser systems Journal of Systems Science, 33 (2). pp. 51-59. ISSN 0137-1223

Howlett, R.J., De Zoysa, M.M. and Walters, Simon (2003) Monitoring I.C. engines using neural networks In: Proceedings, 6th International Conference on Engines for Automobiles (ICE2003), 14-19 Sep 2003, Capri, Italy.

Howlett, R.J., De Zoysa, M.M. and Walters, Simon (2000) Monitoring internal combustion engines by neural network based virtual sensing In: Jain, L. and Fanelli, A.M., eds. Recent advances in artificial neural networks. CRC Press, London, pp. 291-318. ISBN 0849322685

Howlett, R.J., Jain, L.C. and Lee, Shin (2009) Sustainability in Energy and Buildings [Edited Collections]

Howlett, R.J. and Walters, Simon (2000) A multi-computer neural network architecture in a virtual sensor system application International Journal of Knowledge-Based and Intelligent Engineering Systems, 4 (2). pp. 86-93. ISSN 1327-2314

K

Knight, C.S., Garrett, Christopher, Walters, Simon and Howlett, R.J. (2002) Determining the air-fuel ratio of a four-stroke internal combustion engine from spark ignition voltage waveforms In: International Universities Power Engineering Conference, 9-11 Sep 2002, Staffordshire University, UK.

Koukouvinis, P., Gavaises, Manolis, Georgoulas, Anastasios and Marengo, Marco (2015) Compressible bubble dynamic simulations with central-upwind schemes Journal of Physics: Conference Series, 656 (1). ISSN 1742-6588

Koukouvinis, Pheovos, Gavaises, Manolis, Georgoulas, Anastasios and Marengo, Marco (2016) Compressible simulations of bubble dynamics with central-upwind schemes International Journal of Computational Fluid Dynamics, 30 (2). pp. 129-140. ISSN 1061-8562

L

Lee, Shin, Begg, Steven and Howlett, R.J. (2010) Control and modelling of multi-source renewable energy systems Proceedings, 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS2010) (333).

Lee, Shin, Howlett, R.J. and Walters, Simon (2006) Fuzzy and neuro-fuzzy techniques for modelling and control In: 10th International Conference on Knowledge-based Intelligent Information and Engineering Systems (KES2006), 9-11 Oct 2006, Bournemouth, UK.

Lee, Shin, Howlett, R.J. and Walters, Simon (2003) A fuzzy control system for a small gasoline engine In: 7th International Conference on Knowledge-based Intelligent Information and Engineering Systems (KES2003), 3-5 Sep 2003, Oxford, UK.

Lee, Shin, Walters, Simon and Howlett, R.J. (2005) An adaptive neuro-fuzzy modelling of diesel spray penetration In: ICE 2005, 11-16 Sep 2005, Capri, Italy, 11-16 September, 2005.

Lefkaditis, D., Barron, A. and Awcock, G. (2007) User-orientated approach to developing modular video analysis systems for engineering research applications Imaging Science Journal, 55 (4). pp. 206-214. ISSN 1368-2199

Li, Jintang and Mason, David (2002) Application of the discrete element modelling in air drying of particulate solids Drying Technology, 20 (2). pp. 255-282. ISSN 1532-2300

M

Mangini, Daniele, Mameli, Mauro, Georgoulas, Anastasios, Araneo, L., Filippeschi, S. and Marengo, Marco (2015) A pulsating heat pipe for space applications: Ground and microgravity experiments International Journal of Thermal Sciences, 95. pp. 53-63. ISSN 1290-0729

Mason, David, Heikal, Morgan and Douch, N. (2006) Air side fouling of compact heat exchangers International Journal of Heat Exchangers, VII (1). pp. 1-14. ISSN 1524-5608

Mason, David and Levy, Avi (2001) A model for non-suspension gas–solids flow of fine powders in pipes International Journal of Multiphase Flow, 27 (3). pp. 415-435. ISSN 0301-9322

N

Nabialek, M., Dospial, M., Szota, M., Oiszewski, S. and Walters, Simon (2011) Manufacturing of the bulk amorphous Fe61Co10Zr2+xHf3−xW2Y2B20 alloys (where x = 1, 2, 3) their microstructure, magnetic and mechanical properties Journal of Alloys and Compounds, 509 (S1). S156-S160. ISSN 0925-8388

Nabialek, M., Pietrusiewicz, P., Szota, M., Jeziorski, L., Borkowski, S., Bokuvka, O., Dospial, M., Jedryka, J., Ozga, K., Dus-Sitek, M., Bragiel, P., Szota, K., Lesz, S. and Walters, Simon (2010) Study of the Microstructure and Magnetic Properties of the Fe73Me5Y3B19 Alloys (Where Me=Ti or Nb) Amorphous Alloys Obtained by Single-direction, Rapid-quenching Method In: Proceedings XXXVIII School of Materials Science, 28 September - 1 October, Krakow-Krynica, Poland.

P

Panesar, Angad (2015) A Novel Integrated Cooling and Heat Recovery System Using Organic Rankine Cycle for Diesel Engines In: 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, Thiruvananthapuram, India, 17-20 December, 2015.

Panesar, Angad (2016) An innovative Organic Rankine Cycle system for integrated cooling and heat recovery Applied Energy. ISSN 0306-2619

Panesar, Angad (2016) An innovative organic Rankine cycle approach for high temperature applications Energy. ISSN 0360-5442

Panesar, Angad, Heikal, Morgan, Marengo, Marco and Miche, Nicolas (2015) A Novel Organic Rankine Cycle (ORC) for High Temperature Applications In: 2nd International Conference on Energy and Environment, Guimarães, Portugal, 18-19 June, 2015.

Panesar, Angad, Heikal, Morgan, Marengo, Marco and Morgan, Robert (2015) A novel working fluid for Organic Rankine Cycles (ORC) In: Vehicle Thermal Management Systems 12, Nottingham, UK.

Panesar, Angad, Heikal, Morgan and Morgan, Robert (2015) A novel organic Rankine cycle system for heavy duty Diesel engines In: Sustainable Thermal Energy Management, Newcastle upon Tyne, UK.

Pearce, D., Philip, M., Whibley, I. and Cutts, E. (2004) Simulation of the dynamic suspension loads associated with variable speed direct drive wind turbines International Journal of Engineering Simulation, 5 (3). ISSN 1468-1137

S

Saeed, A., Saeed, Khizer, Ahmad, Akhlaq and Malik, Khursheed A. (2006) Multizones modeling of the combustion characteristics of oxygenated fuels in CI engines SAE technical paper series (2006-01-0051). SAE, Warrendale, PA, USA.

Salemi, R., Koukouvinis, P., Strotos, G., McDavid, R., Wang, Lifeng, Li, Jason, Marengo, Marco and Gavaises, Manolis (2015) Evaluation of friction heating in cavitating high pressure Diesel injector nozzles Journal of Physics: Conference Series, 656 (1). ISSN 1742-6588

Sazhin, Sergei (2006) Advanced models for fuel droplet heating and evaporation Progress in Energy and Combustion Science, 32 (2). pp. 162-214. ISSN 0360-1285

Sazhin, Sergei, Heikal, Morgan, Dombrovsky, L.A. and Sazhina, Elena (2002) New models for convective and radiative heating of fuel droplets: application to numerical simulation of combustion processes in diesel engines In: 9th International Conference on Numerical Combustion, 7-10 April 2002, Sorrento, Italy. (Unpublished)

Sazhin, Sergei, Shishkova, Irina and Al Qubeissi, Mansour (2016) A self-consistent kinetic model for droplet heating and evaporation International Journal of Heat and Mass Transfer, 93. pp. 1206-1217. ISSN 0017-9310

Szota, M., Jedryka, J., Nabialek, M., Szota, K., Borkowski, S., Pietrusiewicz, P., Novy, F., Dospial, M., Ozga, K., Dus-Sitek, M. and Walters, Simon (2010) The Analysis of Influence of Mechanical Moulding Conditions on Current Parameters and Structural Properties of High Temperature Superconductors Tapes In: Proceedings XXXVIII School of Materials Science, 28 September - 1 October, Krakow-Krynica, Poland.

T

Tzanakis, Iakovos, Eskin, Dimitri, Georgoulas, Anastasios and Fytanidis, Dimitrios (2013) Incubation pit analysis and calculation of the hydrodynamic impact pressure from the implosion of an acoustic cavitation bubble Ultrasonics Sonochemistry, 21 (2). pp. 866-878. ISSN 1350-4177

Tzanakis, Iakovos, Georgoulas, Anastasios, Hadfield, Mark and Kotsovinos, Nikolaos (2012) Cavitation erosion behaviour of the steel plate of a scroll expander system WIT Transactions on Engineering Sciences, 76. pp. 129-137. ISSN 1743-3533

Tzanakis, Iakovos, Hadfield, Mark, Georgoulas, Anastasios and Kotsovinos, Nikolaos (2010) Cavitation damage observations within scroll expander lubrication systems WIT Transactions on Engineering Sciences, 66. pp. 261-272. ISSN 1743-3533

V

Villa, Fabio, Georgoulas, Anastasios, Marengo, Marco, Di Marco, Paolo and De Coninck, J. (2016) Pool Boiling Versus Surface Wettability Characteristics In: Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT’16), Prague, Czech Republic, April 4 – 5, 2016.

W

Walters, Simon, De Zoysa, M.M. and Howlett, R.J. (2006) Monitoring the air-fuel ratio of internal combustion engines using a neural network International Journal of Measurement Science and Technology, 17 (10). pp. 2773-2782. ISSN 0957-0233

Walters, Simon and Howlett, R.J. (2000) Neural network analysis of ignition spark voltage vectors for combustion quality monitoring In: International Conference on the Engineering of Intelligent Systems, 27-30 June 2000, Paisley, Scotland.

Walters, Simon, Howson, P.A. and Howlett, R.J. (2005) Functional testing of spark plugs using ignition sparks In: Proceedings, 40th Universities Power Engineering Conference, 7-9 Sep 2005, Cork, Ireland.

Walters, Simon, Howson, P.A. and Howlett, R.J. (2005) Production testing of spark plugs using a neural network In: Proceedings of the International Conference on Knowledge-based Intelligent Information and Engineering Systems (KES2005), 14-16 Sep 2005, Melbourne, Australia.

Walters, Simon, Howson, P.A. and Howlett, R.J. (2007) Semi-automatic production testing of spark plugs In: International Conference on Knowledge-based Intelligent Information and Engineering Systems (KES2007), 12-14 Sep 2007, Vietri sul Mare, Italy.

Walters, Simon, Howson, P.A. and Howlett, R.J. (2007) A survey of spark plug production testing tools and techniques International Journal of COMADEM, 10 (4). pp. 2-12. ISSN 1363-7681

X

Xie, Jianfei (2013) Development of a new kinetic model for the analysis of heating and evaporation processes in complex hydrocarbon fuel droplets Doctoral thesis, University of Brighton.

This list was generated on Wed Jul 27 04:42:07 2016 BST.