Browse by Faculties

A

Abramzon, B. and Sazhin, Sergei (2006) Convective vaporization of fuel droplets with thermal radiation absorption Fuel, 85 . pp. 32-36. ISSN 0016-2361

Achasov, O.V., Labuda, S.A., Begg, S.M., Heikal, M.R., Savic, S. and Sazhin, S.S. (1999) Gas dynamically controlled combustion in gas mixtures: application to internal combustion engines In: Proceedings of International Seminar "Conversion of Scientific Research in Belarus within the Framework of ISTC Activity", 17-22 May 1999, Minsk, Belarus.

Awcock, G.J. (2009) Use of computer moderated quizzes to develop a 'real-time engagement' culture In: International Conference on Engineering and Product Design Education, 10 - 11 Sep 2009, Brighton, UK.

B

Baha, B (1999) Analysis and control of a cross-regulated multi-output forwardquasi-resonant converter Circuits, Devices and Systems, IEE Proceedings, 146 (5). pp. 255-262. ISSN 1350-2409

Baha, B (2003) Engineering Education in Afghanistan In: WFEO/ASEE International Colloquium 2003.

Baha, B (2006) Information and communication technology (ICT) and education in Afghanistan In: 1st ICT National Conference, 25-26 Apr 2006, Afghanistan.

Baha, B (1998) Modelling of resonant switched-mode converters using SIMULINK Electric Power Applications, IEE Proceedings, 145 (3). pp. 159-163. ISSN 1350-2352

Baha, B (2005) Modernizing the curriculum for the department of electrical engineering of Kabul University In: SAE Conference, 17-18 Dec 2005, Kabul, Afghanistan.

Baha, B (1998) Simulation of switched-mode power electronic circuits In: International Conference on Simulation '98, 30 Sept - 2 Oct 1998, York, UK.

Baha, B, Howson, P.A. and Howlett, R.J. (2001) Identification and Control of Resonant Switch Mode Converters Using Neural Networks In: IEE-UPEC 2001, Cardiff, UK.

Baha, B and Katz, T (2010) The effect of partnerships on engineering education in Afghanistan In: International Symposium for Engineering (ISEE 2010), University College Cork, Ireland.

Baha, B and Tokhi, M.O. (1997) Dynamic modelling and control of resonant switch mode converters Journal of Control Engineering Practice, 5 (11). pp. 1533-1542. ISSN 0967-0661

Baha, B, Tokhi, M.O. and Howson, P.A. (2003) Feedback Control of dc-dc Converters In: 38th International Universities Power Engineering Confrence, 1 - 3 Sept 2003, Thessaloniki, Greece.

Baha, B. and Ahmadi, O. (2010) The rapid development of Computer Science and Information and Communication Technology (ICT)courses at higher education institutions in Afghanistan In: 2010 ASEE Annual Conference, 20-23 June, 2010, Louisville, Kentucky, USA.

Baha, B. and Baha, Z. (2008) Technical, vocational and engineering education in Afghanistan In: American Society of Engineering Education. ASEE, Philadelphia, USA. ISBN 087823196X

Baha, B. and Katz, T. (2009) Modernizing the USSR era curriculum for electrical engineering at Kabul Polytechnic University In: American Society of Engineering Education. ASEE, Austin, Texas. ISBN 9780878232024

University of Brighton (2008) TinGlass Construction Unit Patent GB0708603.6.

Begg, S., deSercey, G., Heikal, M., Gilchrist, R., Noda, Y. and Mamiya, Y. (2009) Experimental investigation of the characteristics of oil behaviour in an idealised engine crankcase Proc. JUMV Intl. Automotive Conf. and Exhibition (XXII Science and Motor Vehicles 2009), Paper 35 .

Begg, S., Hindle, M., Mason, D. and Heikal, M. (2008) Dispersed flow of fuel droplets on the intake valve region of a port-injected engine Proc. of 22nd European Conf. on Liquid Atomization and Spray Systems (ILASS 2008) (6-4).

Begg, S., Mason, D. and Heikal, M. (2009) Combustion phasing in an optical gasoline engine operating in the limit of spark-assisted controlled auto-ignition Proc. JUMV Intl. Automotive Conf. and Exhibition (XXII Science and Motor Vehicles 2009), Paper 36 .

Begg, S., Parmenter, D., Mason, D. and Heikal, M. (2008) Mixture preparation and combustion characteristics in a compression-ignition gasoline engine Proc. 14th Intl. Symp. on Appl. of Laser Techniques to Fluid Mechanics, 12 (2-4).

Bish, N.B., Howson, P.A. and Walters, S.D. (2008) Proceedings of the 42nd Universities Power Engineering Conference (UPEC 2007) Universities Power Engineering Conference UPEC, Two volumes (Hardcopy); One volume (Electronic) . IEEE Xplore, University of Brighton. ISBN 978-1-905593-36-1

C

Cameretti, M.C., Piazzesi, R., Reale, F. and Tuccillo, R. (2008) Combustion simulation of an EGR operated micro-gas turbine In: American Society of Mechanical Engineers paper GT2008-50692. ASMI.

Covill, D, Guan, Z, Bailey, M and Raval, H (2006) Finite element analysis of the heat and mass transfer in footwear In: Young Biomedical Engineers Research Conference, Prague, Czech Republic. (Unpublished)

Covill, D, Katz, T and Morris, R (2007) A top down approach to teaching engineering mechanics In: International Symposium for Engineering Education, 17-19 Sep 2007, Dublin, Ireland.

Covill, D, Singh Gill, D, Katz, T and Morris, R (2010) Embedding ethics into the engineering and product design curriculum: A view from the UK In: When Design Education and Design Reserach Meet. The Design Society & The Institute of Engineering Designers, Wiltshire, UK, pp. 132-136. ISBN 978-1-904670-19-3

Covill, D. (2009) The growing use of video in engineering and design education Engineering Designer, 35 (1). pp. 18-20. ISSN 0013-7898

Covill, D., Farr, J., Katz, T. and White, D. (2008) Use of static stiffness behaviour to characterise field hockey sticks In: The Engineering of Sport 7. Springer Paris, pp. 239-246. ISBN 978-2-287-09412-5

Covill, D., Guan, Z., Bailey, M. and Pope, D. (2003) Effects of environmental conditions on in-shoe temperature Proceedings from the ISB Footwear Symposium, Queenstown, New Zealand .

Covill, D., Katz, T. and Morris, R. (2008) Teaching and assessing CAD using online demonstrations Proceedings of EDPE '08: Learning Technology, 2 . pp. 681-686.

Cowell, T, Ayad, F, Benelmir, R and Idris, M (2007) Model of flow boiling heat transfer coefficient for carbon dioxide vaporization inside horizontal mini-channel tubes In: Proceedings of the IMechE's VTMS8 - Vehicle Thermal Management Systems Conference, 20-24 May 2007, Nottingham, UK.

D

De Sercey, G, Awcock, G.J. and Heikal, M.R. (2005) Use of LIF image acquisition and analysis in developing a calibrated technique for in-cylinder investigation of the spatial distribution of air-to-fuel mixing in direct injection gasoline engines Computers in Industry, 56 . pp. 1005-1015. ISSN 0166-3615

Dombrovsky, L.A., Sazhin, S and Zinoviev, A. (2004) Thermal explosion in flammable gas containing fuel droplets: asymptotic analysis In: 5th Minsk International Heat and Mass Transfer Forum, May 24-28, Minsk, Belarus. Section 4: Heat and mass transfer in chemically reacting systems. National Academy of Sciences of Belarus, Minsk, pp. 346-347.

Dombrovsky, L.A., Sazhin, Sergei, Sazhina, Elena M., Feng, G., Heikal, Morgan R., Bardsley, M.E.A. and Mikhalovsky, S.V. (2001) Heating and evaporation of semi-transparent diesel fuel droplets in the presence of thermal radiation Fuel, 80 (11). pp. 1535-1544. ISSN 0016-2361

E

El-Hawat, S.M., Heikal, M.R. and Sazhin, S (2001) An improved three dimensional numerical model of flow and heat transfer over louvred fin arrays International Journal of Heat Exchangers, II . pp. 37-44.

G

Glober, S, Lieser, M and Cowell, T (2007) A simple model for a vehicle front-end air flow characteristic In: Proceedings of the IMechE's VTMS8 - Vehicle Thermal Management Systems Conference, 20-24 May 2007, Nottingham, UK.

Gold, M.R., Stokes, J, Morgan, R.E., Heikal, M.R., Begg, S.M. and De Sercey, G (2001) Air-fuel mixing in a homogeneous charge DI gasoline engine SAE Transactions 2001, Journal of Fuels & Lubricants, 110 (4). pp. 827-835.

H

Howlett, R.J., De Souza, M.M. and Walters, S.D. (2000) Monitoring internal combustion engines by neural network based virtual sensing In: Recent advances in artificial neural networks. CRC Press, pp. 291-318. ISBN 0849322685

Howlett, R.J., DeZoysa, M.M. and Walters, S.D. (1999) Neural Network Techniques for Monitoring and Control of Internal Combustion Engines In: International ICSC Symposium on Intelligent Industrial Automation (IIA), Genoa.

Howlett, R.J., Howson, P.A. and Walters, S.D. (1996) Condition Monitoring in an Automotive Spark Ignition Engine using a Multi-computer Neural Network In: Condition Monitoring & Diagnostic Engineering Management (COMADEM), July 1996, Sheffield.

Howlett, R.J., Howson, P.A., Walters, S.D. and Pashley, N.C. (1996) Determination of A.F.R. in Automotive Ignition System using Neural Networks In: 29th International Symposium On Automotive Technology and Applications (ISATA), 3rd-6th June 1996, Florence, Italy.

Howlett, R.J., Louvet, S. and Walters, S.D. (2003) A Virtual Engine for the Investigation of Engine Management Strategies Based on a Fuzzy Control In: 4th International Conference on Control and Diagnostics in Automotive Applications (CD-AUTO-03).

Howlett, R.J. and Walters, S.D. (2000) A multi-computer neural network architecture in a virtual sensor system application International journal of knowledge-based intelligent engineering systems, 4 (2). pp. 86-93. ISSN 1327-2314

Howlett, R.J., Walters, S.D., Howson, P.A. and Park, I.A. (1998) Air-Fuel Ratio Measurement in an Internal Combustion Engine using a Neural Network In: International Conference on Advances in Vehicle Control and Safety (AVCS ‘98), 1-3 July 1998, Amiens, France.

I

Idris, M, Damotte, H and Cowell, T (2007) R744 gas cooler model development and validation In: Proceedings of the IMechE's VTMS8 - Vehicle Thermal Management Systems Conference, 20-24 May 2007, Nottingham, UK.

J

Julienne Carol, Attwood (2007) Physical Ageing by Ultra Violet Degradation of Recycled Polyolefin Blends Masters thesis, University of Brighton.

K

Katok, K.V. and Tertykh, V.A. (2006) Silica matrices in asynthesis of carbon nanotubes In: Trends in Nanotubes Research. Nova Science Publ., New York, USA, pp. 103-121.

Katok, K.V., Tertykh, V.A., Brichka, S.Ya and Prikhod'ko, G.P. (2006) Catalytic synthesis of carbon nanotubes over ordered mesoporous matrices Journal of Thermal Analysis and Calorimetry, 86 (1). pp. 109-114. ISSN 1388-6150

Katok, K.V., Tertykh, V.A., Brichka, S.Ya and Prikhod'ko, G.P. (2006) Pyrolytic synthesis of carbon nanostructures on Ni, Co, Fe/MCM-41 catalysts Materials Chemistry and Physics, 93 (2-3). pp. 396-401. ISSN 0254-0584

Katok, K.V., Tertykh, V.A. and Yanishpolskii, V.V. (2009) Synthesis and characterization of silver/silica nanostructures In: Physics and Biophysics "Nanostructured Materials for Advanced Technological Applications". NATO Science for Peace and Security Series B . Springer.

Katz, T., Covill, D., Morris, R. and Mortezaei, R. (2008) Assessment issues in a professionally oriented product design course Conference on Engineering and Product Design Education, EPDE’08, 2 . pp. 817-822.

L

Lee, S.H., Begg, S.M. and Howlett, R.J. (2010) Control and modelling of multi-source renewable energy systems Proceedings, 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS2010) (333).

Lee, S.H., Walters, S.D. and Howlett, R.J. (2008) Intelligent GPS-Based vehicle control for improved fuel consumption and reduced emissions In: Knowledge-Based Intelligent Information and Engineering Systems, 12th International Conference, KES 2008, 3-5 Sept 2008, Zagreb, Croatia.

Lefkaditis, D., Barron, A. and Awcock, G.J. (2007) User-orientated approach to developing modular video analysis systems for engineering research applications Imaging Science Journal, 55 (4). pp. 206-214.

Li, Jintang and Mason, David J. (2002) Application of the discrete element modelling in air drying of particulate solids Drying Technology, 20 (2). pp. 255-282. ISSN 1532-2300

M

Martynov, S.B., Mason, D.J. and Heikal, M.R. (2005) Hydrodynamic Similarity of Cavitation Flows in Nozzles In: 5th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, 3-6 Jul 2005, Xi'an, China.

Mason, D., Begg, S., Cooper, B. and Jackson, N. (2008) A low compression ratio low NOx diesel combustion system Proc. SIA Intl. Conf., Diesel engines: The low CO2 and ermissions reduction challenge .

Mason, D.J., Heikal, M.R. and Douch, N (2006) Air side fouling of compact heat exchangers International Journal of Heat Exchangers, VII (1). pp. 1-14. ISSN 1524-5608

Mason, David J. and Levy, Avi (2001) A model for non-suspension gas–solids flow of fine powders in pipes International Journal of Multiphase Flow, 27 (3). pp. 415-435. ISSN 0301-9322

Morris, R, Katz, T and Covill, D (2008) Widening Participation and Admissions to Higher Education In: Society for Research in Higher Education Conference, 9-11 Dec 2008, Liverpool, UK.

N

Nabialek, M., Dospial, M., Szota, M., Oiszewski, S. and Walters, S.D. (2011) Manufacturing of the bulk amorphous Fe61Co10Zr2+xHf3−xW2Y2B20 alloys (where x = 1, 2, 3) their microstructure, magnetic and mechanical properties Journal of Alloys and Compounds, 509 (S1). S156-S160. ISSN 0925-8388

Nabialek, M., Pietrusiewicz, P., Szota, M, Jeziorski, L., Borkowski, S., Bokuvka, O., Dospial, M., Jedryka, J., Ozga, K., Dus-Sitek, M., Bragiel, P., Szota, K., Lesz, S. and Walters, S.D. (2010) Study of the Microstructure and Magnetic Properties of the Fe73Me5Y3B19 Alloys (Where Me=Ti or Nb) Amorphous Alloys Obtained by Single-direction, Rapid-quenching Method In: Proceedings XXXVIII School of Materials Science, 28 September - 1 October, Krakow-Krynica, Poland.

O

Osborne, R., Li, G., Gold, M., Stokes, J., Heikal, M. and Begg, S. (2003) Evaluation of HCCI for future gasoline powertrains In: SAE 2003 World Congress & Exhibition; Session: Homogeneous Charge Compression Ignition (HCCI) Combustion, March, 2003, Detroit, MI, USA.

P

Pearce, D., Philip, M., Whibley, I. and Cutts, E. (2004) Simulation of the dynamic suspension loads associated with variable speed direct drive wind turbines International journal of engineering simulation, 5 (3). ISSN 1468-1137

Philip, Mathew L. and Bolton, Bill (2002) Technology of engineering materials Butterworth-Heinemann, Oxford, UK. ISBN 0750656433

R

Rachid, A., Walters, S.D. and Mpanda, A (2011) Pantograph catenary interaction framework for intelligent control Railway Pro . pp. 46-47. ISSN 1841-4672

Raval, H, Guan, Z, Bailey, M and Covill, D (2006) Simplified 3-D FE model of thermal conditions inside a shoe Advanced Computational Methods in Heat Transfer IX. Proceedings from the Heat Transfer Conference, Wessex Institute of Technology .

S

Saeed, A., Saeed, K., Akhlaq, A. and Malik, K.A. (2007) Multizones Modeling of the Combustion Characteristics of Oxygenated Fuels in CI Engines In: SAE World Congress 2006 (Also in SP 2014), April 3-6, 2006, Cobo Centre, Detroit, USA.

Saeed, A., Saeed, Khizer, Ahmad, Akhlaq and Malik, Khursheed A. (2006) Multizones modeling of the combustion characteristics of oxygenated fuels in CI engines SAE technical paper series (2006-01-0051). SAE, Warrendale, PA, USA.

Saeed, K, Heikal, M R and Hamid, M (2003) Modelling of Premixed Laminar Combustion of Hydrogen and Oxygenated Fuels Inside a Closed Spherical Vesse In: SAE 2007 Fuel and Emisssion Conference, 23-25 Jan 2007, Cape Town South Africa.

Saeed, K and Stone, R (2007) Laminar burning velocities of propene-air mixtures at elevated temperatures and pressures Journal of the Energy Institute, 80 (2). pp. 73-82. ISSN 0144-2600

Sazhin, S (2006) Advanced models for fuel droplet heating and evaporation Progress in Energy and Combustion Science, 32 . pp. 162-214. ISSN 0360-1285

Sazhin, S, Abdelghaffar, W.A., Krutitskii, P.A., Sazhina, E.M. and Heikal, M.R. (2004) Numerical modelling of droplet transient heating and evaporation In: 5th Minsk International Heat and Mass Transfer Forum, May 24-28, Minsk, Belarus. Section 6: Heat and mass transfer in disperse and rheological systems. National Academy of Sciences of Belarus, Minsk, pp. 189-190.

Sazhin, S, Gol'dshtein, V.A. and Heikal, M.R. (2001) A transient formulation of Newton's cooling law for spherical bodies Journal of Heat Transfer, 123 (1). pp. 63-64. ISSN 1528-8943

Sazhin, S, Heikal, M.R., Dombrovsky, L.A. and Sazhina, E.M. (2002) New models for convective and radiative heating of fuel droplets: application to numerical simulation of combustion processes in diesel engines In: 9th International Conference on Numerical Combustion, 7-10 April 2002, Sorrento, Italy. (Unpublished)

Sazhin, S, Kaplanski, F, Feng, G, Heikal, M.R. and Bowen, P.J. (2001) A fuel spray induced vortex ring Fuel, 80 (13). pp. 1871-1883. ISSN 0016-2361

Sazhin, S, Krutitskii, P.A., Martynov, S.B., Mason, D.J., Heikal, M.R. and Sazhina, E.M. (2007) Transient heating of a semitransparent spherical body International Journal of Thermal Sciences, 46 (5). pp. 444-457.

Sazhin, S., Kaplanski, F., Begg, S. and Heikal, M. (2009) Vortex ring-like structures in gasoline fuel sprays Proc. JUMV Intl. Automotive Conf. and Exhibition (XXII Science and Motor Vehicles 2009), Paper 31 .

Sazhin, S.S., Abdelghaffar, W.A., Krutitskii, P.A., Sazhina, E.M. and Heikal, M.R. (2005) New approaches to numerical modelling of droplet transient heating and evaporation International Journal of Heat and Mass Transfer, 48 (19-20). pp. 4215-4228. ISSN 0017-9310

Sazhin, S.S., Shishkova, I.N., Kristyadi, T., Martynov, P. and Heikal, M. (2007) Droplet heating and evaporation: hydrodynamic and kinetic models In: 'Advances in Heat Transfer', Proceedings of the Baltic Heat Transfer Conference. St Petersburg Polytechnic University, pp. 405-414.

Solbrå, S., Allison, N., Waite, S., Mikhalovsky, S.V., Bortun, A.I., Bortun, L.N. and Clearfield, A. (2001) Cesium and strontium ion exchange on the framework titanium silicate M₂Ti₂O₃SiO_4>·nH₂O (M = H, Na) Environmental Science and Technology, 35 (3). pp. 626-629. ISSN 1520-5851

Szota, M., Jedryka, J., Nabialek, M., Szota, K., Borkowski, S., Pietrusiewicz, P., Novy, F., Dospial, M., Ozga, K., Dus-Sitek, M. and Walters, S.D. (2010) The Analysis of Influence of Mechanical Moulding Conditions on Current Parameters and Structural Properties of High Temperature Superconductors Tapes In: Proceedings XXXVIII School of Materials Science, 28 September - 1 October, Krakow-Krynica, Poland.

T

Tertykh, V.A., Katok, K.V. and Yanishpolskii, V.V. (2008) Reduction nanoparticles of gold in surface layer of modified silica Russian Journal of Physical Chemistry A, Focus on Chemistry, 82 (9). pp. 1438-1441. ISSN 0036-0244

W

Walters, S.D. (1998) Characterization and Analysis of Kettering-type Automotive Ignition Systems and Electrical Spark Profiles Doctoral thesis, University of Brighton.

Walters, S.D. and Howson, P.A. (1996) Modelling of High Voltage Ignition Sparks Produced by Internal Combustion Engine Ignition Systems In: 31st Universities’ Power Engineering Conference, 18-20 Sept. 1996, Technological Educational Institute Iraklio, Crete.

Walters, S.D., Howson, P.A. and Howlett, R.J. (2007) Dielectric Testing of Spark Plugs using Neural Networks In: Universities Power Engineering Conference (UPEC) 2007, 4th - 6th September 2007, University of Brighton.

Walters, S.D., Howson, P.A. and Howlett, R.J. (2005) Production testing of spark plugs using a neural network In: Proceedings of the International Conference on Knowledge-based Intelligent Information and Engineering Systems (KES2005), 14-16 Sep 2005, Melbourne, Australia.

Walters, S.D., Howson, P.A., Howlett, R.J., Ryder, D.M. and Miller, R. (1995) Inverse Analysis of Electrical Discharge Phenomena by Neural Network In: 30th Universities’ Power Engineering Conference, 5th-7th September 1995, Greenwich, London, UK.