PDA characterisation of dense Diesel sprays using a common-rail injection system

Lacoste, J., Crua, C., Heikal, M., Kennaird, D. and Gold, M. (2003) PDA characterisation of dense Diesel sprays using a common-rail injection system In: Proceedings of the SAE Powertrain & Fluid Systems Conference, Pittsburgh, USA, 27 October, 2003.

Full text not available from this repository.

Abstract

To meet the future low emission targets for diesel engines, engineers are optimizing both the fuel injection and aftertreatment systems fitted to diesel engines. In order to optimize the fuel injection system there is a need to characterize the fuel spray for a given injection nozzle geometry and injection pressure/duration. Modern diesel common-rail systems produce very dense sprays, making in-cylinder investigation particularly difficult. In this study the measurement of droplet sizes and velocities in dense diesel sprays has been investigated using Phase Doppler Anemometry (PDA). PDA has been proven to be a valuable technique in providing an understanding of the structure and characteristics of liquid sprays in many studies. It is often applied to finely atomized and dispersed particle flows. However, the application of PDA to dense sprays is complex and therefore the measurements reported in the literature are performed under conditions that are not representative of modern diesel engines. This paper reports both on the processes undertaken to optimize a classic PDA system so that it may be used to gather data in such difficult conditions and on the interpretation of the results obtained. The PDA technique was applied to the instantaneous measurement of diesel droplet sizes and velocities in a rapid compression machine operated at realistic engine conditions. Results are presented for in-cylinder pressures ranging from 1.6 MPa to 6 MPa and injection pressures from 60 to 160 MPa.

Item Type: Contribution to conference proceedings in the public domain ( Full Paper)
Subjects: H000 Engineering > H300 Mechanical Engineering > H330 Automotive Engineering
Faculties: Faculty of Science and Engineering > School of Computing, Engineering and Mathematics > Engineering and Product Design Research > Automotive Engineering
Depositing User: Dr Cyril Crua
Date Deposited: 11 Mar 2010
Last Modified: 21 May 2013 16:11
URI: http://eprints.brighton.ac.uk/id/eprint/2192

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year